Master Precision Garment Steamer

MASTER PRECISION 360 IT6540 Removes creases and wrinkles quickly with the comfort, ease and precision of just one hand.

Tefal’s Master Precision 360° Garment Steamer is a versatile and easy-to-use steaming tool that provides efficient results in no time, with great performance even in tricky, hard-to-reach areas through the precision shot feature. This handy garment steamer smoothes out creases, sanitises and removes odors from a wide variety of fabrics, ideal for both intensive steaming sessions or last-minute touch-ups, to help you look your best whenever you need it.

With wheels for portable convenience, it is also ideal for sanitising around the house - such as upholstery, curtains and bed linen - killing up to 99.99% bacteria, thanks to the combination of temperature & steam pressure.

 

Reference: IT6540Z0

Tefal’s Master Precision 360° Garment Steamer is a versatile and easy-to-use steaming tool that provides efficient results in no time. Perfect for freshing up clothes, removing ordours or just sanitising. New triangular metal head with pointed tip for greater performance, even in trickly, hard-to-to-reach areas

Essentials
  • 2 Setting Options - Concentrated precision shot or diffused steam for versatility

    Easy and precise wrinkle removal down to the last detail: tackle difficult-to-reach areas with the precision shot that concentrates steam through the tip of the steam head

  • 360° rotating hanger for easy front and front steaming

    Easy steaming on the front and back through the 360° rotating hanger, for added convenience and efficient performance.

  • Refreshes & sanitises

    Kills up to 99.99% bacteria, thanks to the combination of temperature & steam pressure. 1500 W of power and steam output of 30 g/min allow deep diffusion through the fibers to refresh and sanitise all fabrics.

  • Quick heat up

    Cut down on time spent on linen care: no trips to the dry cleaner, no ironing board, and a fast heat-up time of just 45 seconds.

  • Easy Refilling

    2.5 L removable water tank allows up to 80 minutes' steaming, perfect for intensive steaming sessions and last-minute touch-ups.

  • Easy adjustable height

    Simple on/off foot-operated pedal, with adjustable pole and robust hanger with integrated pant clips.

  • Easy transportation

    2 large wheels to use your appliance anywhere in the house.

  • Adapted to all fabrics

    Use your steamer on any fabric, even the most delicate, with no risk of burning!

  • Precision

    Large and triangular metal steam head with pointed tip to remove creases efficiently on all fabrics

  • Handy accessories

    3 accessories included:
    - Fabric brush: to open the weaves of the fabric for better steam penetration, ideal for removing creases on thick fabrics
    - Crease attachment: to create pleats in your pants
    - Steam Bonnet: to provide even distribution of steam, filter water impurities and protect fabrics from water drips.

Features
Power 1500  
Steam output 30  g/min
Heat-up time 45  s
Water tank capacity 2,5  L
Power cord length 2  m
Autonomy 80  min
Wheels    
Colours Black / Raspberry  
Guarantee 2 YEARS  
Frequent questions
Untreated tap water:
Your appliance has been designed to use untreated tap water.
If your water is very hard, mix 50% untreated tap water and 50% distilled water.

Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance:
- water from clothes dryers
- scented or softened water
- water from refrigerators, batteries, air conditioners
- rain water
- boiled, filtered or bottled water

In order to ensure the best performance from your iron, these types of water should not be used for ironing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
Your appliance has limescale, consult the "Descaling" section in the instructions.
The "Steam" button is in Continuous Steam position. Unlock it by pressing it once.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.